> For the complete documentation index, see [llms.txt](https://fehdead.gitbook.io/npc-kit/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://fehdead.gitbook.io/npc-kit/vm-reference/calls/show.md).

# npc.show

```lua
npc.show()
```

|                         |                                   |
| ----------------------- | --------------------------------- |
| id                      | `0x0032`                          |
| arguments               | 0                                 |
| in NPC Kit              | yes                               |
| measured from a kit NPC | returns                           |
| vanilla scripts         | 3628 calls in 302 of 1114 scripts |

## What it does

Shows the NPC's model. It is one of two switches: the model is drawn only while `show` is on **and** [hidecomplete](https://fehdead.gitbook.io/npc-kit/vm-reference/calls/hidecomplete.md) is cleared ([clearhidecomplete](https://fehdead.gitbook.io/npc-kit/vm-reference/calls/clearhidecomplete.md)).

## Timing

Returns at once.

## In NPC Kit

* Last lines of `init`: `clearhidecomplete()`, `show()`, `showshadow()`.
* To show a hidden NPC in a scene: `other.show(); other.showshadow();` (and `clearhidecomplete()` if it was hidden with `hidecomplete`).
* The shadow is a separate switch: [showshadow](https://fehdead.gitbook.io/npc-kit/vm-reference/calls/showshadow.md).

## Used with

* [hide](https://fehdead.gitbook.io/npc-kit/vm-reference/calls/hide.md): its off switch.
* [clearhidecomplete](https://fehdead.gitbook.io/npc-kit/vm-reference/calls/clearhidecomplete.md): the other switch.
* [showshadow](https://fehdead.gitbook.io/npc-kit/vm-reference/calls/showshadow.md), [rgbatrans](https://fehdead.gitbook.io/npc-kit/vm-reference/calls/rgbatrans.md) (fade in).
* [show\_38](https://fehdead.gitbook.io/npc-kit/vm-reference/calls/show_38.md)`(1)`: the same switch with an argument.

## Example

```lua
npc.clearhidecomplete();
npc.show();
npc.showshadow();
```
